Lobby Display Installation instructions

• Related Articles

• Truety Gateway Installation Guide

  1. Install the Gateway • Use the mounting hardware to mount and ground the Gateway • Use the Ethernet port to power up the Gateway (120V PoE injector is included with the Gateway. Use PoE port) • Connect the LoRaWAN antenna to the Gateway 2. Check if ...

• Truety Indoor Gateway - Installation Guide

  Truety Indoor Gateway - Installation Guide 1. Install the Gateway • Mount the gateway on a flat surface with M3 screws with 2.4” center spacing, leaving the screw heads protruding with a 3 mm gap from the wall surface. • Connect the LoRaWAN antenna ...

• Truety - Mobile app guide

  Attached is a Truety mobile app guide.

• Signal Testing Guide

  Combined with all of the steps in the 'Test Kit - Quick Start Guide': Truety wireless modules are designed to optimize their communication parameters based on the RF environment, maximizing transmission performance and battery life. Typically, once a ...

• Truety Test Kit - Quick Start Guide

  Use the login credentials provided by QMC Metering Solutions, or use the following link to register an account: https://portal.truety.com/register Download Truety Commissioning app from the App Store: (coming soon) Or download the Android APK file ...