General
Lobby Display Installation instructions
Attached are the installation instructions and CTEP approval that includes operation of the Lobby Display.
Truety - Mobile app guide
Attached is a Truety mobile app guide.
Signal Testing Guide
Combined with all of the steps in the 'Test Kit - Quick Start Guide': Truety wireless modules are designed to optimize their communication parameters based on the RF environment, maximizing transmission performance and battery life. Typically, once a ...
Truety NFC Guide
Truety NFC Guide NFC Technology Truety app utilizes NFC (Near Field Communication) technology to communicate with the system components. To take advantage of the effortless process of commissioning the meters on site, referred to as “Tap and Go” ...
Truety Indoor Gateway - Installation Guide
Truety Indoor Gateway - Installation Guide 1. Install the Gateway • Mount the gateway on a flat surface with M3 screws with 2.4” center spacing, leaving the screw heads protruding with a 3 mm gap from the wall surface. • Connect the LoRaWAN antenna ...
Truety Gateway Installation Guide
1. Install the Gateway • Use the mounting hardware to mount and ground the Gateway • Use the Ethernet port to power up the Gateway (120V PoE injector is included with the Gateway. Use PoE port) • Connect the LoRaWAN antenna to the Gateway 2. Check if ...
Truety Test Kit - Quick Start Guide
Use the login credentials provided by QMC Metering Solutions, or use the following link to register an account: https://portal.truety.com/register Download Truety Commissioning app from the App Store: (coming soon) Or download the Android APK file ...